Commercial Vinyl Fencing in Madison, WI


With limited lifetime warranty against chipping, peeling, and cracking, our fence company in Madison, WI produce commercial vinyl products guaranteed to resist the hot summers and cold winters of the Midwest.

Low Maintenance

Because vinyl does not easily fade, crack, or peel, your vinyl fence in Madison will not require staining, repaints, or total replacements. This means you can spend more time enjoying your home instead of performing maintenance.

Styles and Colors

Our commercial vinyl fences in Madison, WI are cost effective and come in a selection of colors and styles, to complement the exterior look of your home.

Vinyl Fences in Madison, WI Gallery

In the interest of producing the highest quality commercial vinyl fences, our fence company in Madison has formed a partnership with reputable Midwest vinyl manufacturers, including Ply Gem Fence & Rail.

Built to endure, commercial vinyl fencing is resistant to the elements (rain, sunlight) as well as erosion and damaged caused by insects such termites. In contrast to metal and food, which are prone to rot and rust, it is extremely durable, and fences made of vinyl have great longevity. Flexible and resistant to impact, these fences can better withstand everyday wear and tear, making it a worthy investment when adding beauty and security to your property. Speaking of investment, our products are also backed by a lifetime transferable warranty, so you can have peace in mind that the money spent on your vinyl fence in Madison will be worth it. For all of these reasons, we are the premier fence contractor in Madison, WI.

Commercial Vinyl Fences in Madison, WI FAQ

What is the lifespan of my Madison commercial vinyl fence?

What distinguishes vinyl from wood and ornamental fencing most of all is longevity. Commercial vinyl is built to endure, to last, to be resistant to the elements, to sunlight, to insects such as carpenter ants and termites. This is what makes vinyl ideal for Madison home and business owners, as it does not suffer damage easily. In fact, the only damage you may notice is a reduction of sheen: a very minor setback when you take in account that your fence will be extremely long lasting.

Will commercial vinyl fencing fade? What is the strength of this type of Madison fencing?

As is the case with other vinyl products such as siding, commercial vinyl fencing will naturally lose a little of its original sheen with time. Fading, however, will not be an issue, and the modern materials feature chemicals that function similar to sunscreen: designed to reflect solar rays while preserving its color.

Something else that distinguishes vinyl from wood or metal is enhanced flexibility. The materials are engineered to be impact-resistant and withstand a great range of use.

How cost effective is a vinyl fence in Madison, WI, as opposed to a wood fence?

The difference in cost between wood and commercial vinyl is little. However, vinyl does cost less than ornamental steel fencing.

Will commercial vinyl fencing burn? Will it break?

With a flash point of about 900 degrees Fahrenheit, commercial vinyl does not ignite very easily.

As for the risk of it breaking: Although direct impact from, say, an automobile or a rock thrown by a lawnmower can potentially cause such damage, a fence made of commercial vinyl doesn’t break easily so long as it is installed properly. If damage does occur, however, you can simply call us, the premier fence company in Madison. In most cases, rails and pickets can be replaced.

How do you clean commercial vinyl? Is it resistant to graffiti?

Mild detergents and water is usually enough to sufficiently clean your fence and rails. In the case of harder to remove stains, you can try Soft Scrub, baking soda, Simple Green, and steel wool. Remember: although it is extremely resilient to the elements, your commercial vinyl fence, by the nature of being outside, will become dirty over time.

Although not classified as graffiti proof, vinyl fencing is easy to clean and maintain. Paint comes off with just a small amount of effort. Use of a pressure washer or, in extreme cases, the use of paint thinner might also be needed, and 400 grit sandpaper can be used if the above mentioned techniques end up not working.

Does this fence contractor in Madison, WI cement its vinyl fence posts?

Yes. Vinyl fence posts should be set in pre-mixed, wet concrete set under and around the fence post. Dry mix with added water later doesn’t provide perfect consistency as the concrete solidifies.

What is the warranty on the commercial vinyl products produced by this fence company in Madison?

AmeriFence Corporation’s commercial vinyl products carry a lifetime warranty.

What about custom vinyl fence styles?

When you select a custom vinyl fabricator like AmeriFence Corporation of Madison, you can create just about any design for your fence.

Will my commercial vinyl fence yellow?

Our Madison fence company’s commercial vinyl products are resilient and can stand up to sun damage, thanks to the inclusion of titanium dioxide, which helps prevents ultraviolet degradation. What’s more, we have formed a partnership with Kroy Vinyl Products, and they warrant our products for 20 years against premature yellowing.

Does commercial vinyl become brittle in the winter?

Vinyl tends to become less flexible as the temperature goes down. Fortunately, though, unless subjected to unusually harsh physical impacts, it should not break or crack in the winter. Our PVC is manufactured in Nebraska, engineered to accommodate temperature common to the Midwest.

How resistant is commercial vinyl to weed eaters?

Just like with wood fencing, direct contact with lawn and garden equipment has the potential to cause damage to commercial vinyl, including your fence posts. For this reason, you should use caution when operating equipment, of any kind, near your fence. Be especially careful when using trimmers. If you have questions about our weed barrier products for lawn trimming near your fence, feel free to call!

Should the commercial vinyl fence in my Madison yard be unique?

In selecting a fence contractor in Madison, it is absolutely essential that you make sure their services include custom fabricator. This is a service we at AmeriFence Corporation offer as well. Custom fabrication includes five steps.

  1. We will personally meet with you to review the layout and design of your fence.
  2. We stake your yard for your review and approval.
  3. We provide you with a post layout map. This will show where each fence post will be installed.
  4. After the posts are set, we will make a fabrication drawing. This will illustrate the dimensions and slope of each bay.
  5. Our computerized custom fabrication shop will then fabricate each individual panel according to this drawing.