VINYL FENCING IN MADISON, WI

If you are looking for a vinyl fence, AmeriFence Corporation of Madison has teamed up with Ply Gem Fence & Rail and other reputable vinyl fencing manufacturers.

Whether it’s vinyl fencing, vinyl privacy fences or vinyl gates, vinyl is simply designed for durability. Madison vinyl fencing is also resistant to erosion and damage from rain, sunlight and to damage from insects such as termites and carpenter ants. Unlike other traditional fence materials such as metal and wood, vinyl fencing won’t rot or rust over time. Vinyl is a flexible material is also impact-resistant, so it can stand up to everyday wear and tear. The longevity of vinyl fencing makes it a sustainable fencing option. Our vinyl fencing products are backed by a lifetime transferable warranty so you can have peace of mind that your investment is protected. Visit AmeriFence in Madison to discuss the available options.

Vinyl Fencing in Madison, WI FAQ

How long will vinyl fencing in Madison, WI last?

This is where vinyl fencing stands apart from wood and ornamental. PVC fencing will last a lifetime. The only thing you may notice is you may see the fence lose a little sheen over time.

Will my Madison vinyl fence fade?

Like vinyl siding and windows, vinyl fencing will lose a little of its sheen overtime. However, it will not fade. Modern vinyl fencing has a chemical formulation similar to sunscreen. It is designed to permanently reflect the sun’s rays and hold its colors.

How strong is Madison vinyl fencing?

Unlike wood or metal fencing, vinyl fencing has a degree of flexibility. However, the materials are engineered to be impact-resistant with a chemical formulation that will withstand a wide range of normal use. From rocks to balls to animals, your AmeriFence Corporation of Madison vinyl fence will hold up to the challenge.

What is the cost of vinyl compared to wood?

Comparable. As a matter of fact, if you compare a typical #1 grade cedar fence and add the price of staining, vinyl fencing is more price competitive. Vinyl costs less than ornamental steel.

Will vinyl burn?

PVC has a flash point of approximately 900 degrees and will not easily ignite. Vinyl is classified as “self-extinguishing”.

Will vinyl fence break?

Vinyl fence materials can break if subjected to a direct impact, i.e. an automobile, ball, or a rock thrown from a mower. Under normal use, the fence will not break when installed properly. If your fence does break, call AmeriFence Corporation of Madison. In most cases the rails and pickets can easily be replaced.

There are dozens of PVC products available across fence contractors, varying from recycled pop bottles to virgin vinyl. Be sure to select a high-quality product from an established fence contractor with at least a decade of experience. You can be sure that these contractors have selected only quality products for your yard.

How do you clean vinyl fencing in Madison, WI?

As with all outside products, your fence will become dirty when exposed to the elements. A mild detergent and water should be sufficient to keep your fence or deck rail looking new. For tough stains, Soft Scrub or baking soda works well. Simple Green and steel wool also works to clean stubborn stains.

Is the PVC graffiti proof?

Although not classified as graffiti proof, vinyl fencing is easy to clean and paint comes off with just a small amount of effort. It may require the use of a pressure washer or, in extreme cases, the use of paint thinner. 400 grit sandpaper can be used when some spots will not come off using the above methods.

Do you cement the vinyl fence posts in Madison, WI?

Absolutely! All vinyl posts should be set in pre-mixed wet concrete. Not dry mix with water added later. This application generally does not provide 100% consistency in the concrete. Concrete should be placed under and around the fence post.

What is the warranty on our vinyl fence?

All of our PVC products carry a lifetime warranty. During the life of the vinyl fence, you should not expect to find peeling, chipping, surface cracking or rot. Almost all vinyl products carry a lifetime warranty. Be sure to select a reputable fence contractor with many years of experience who will be around to service your warranty.

Can I get custom styles for vinyl fencing in Madison, WI?

Yes. By selecting a custom vinyl fabricator like AmeriFence Corporation of Madison, you can create almost any design. With the Midwest’s largest computerized fabrication shop, we can build your dream.

Will vinyl fencing yellow?

Modern quality vinyl fencing contains titanium dioxide (TIO2) which prevents ultraviolet degradation. AmeriFence Corporation of Madison has partnered with Kroy Vinyl Products in warranting our vinyl product for 20 years against premature discoloration and yellowing.

Does vinyl fence become brittle in the winter?

As with most PVC products, vinyl fence will become less flexible in the colder weather. However, unless subjected to unusual impact, quality vinyl materials will not break or crack. At AmeriFence Corporation, the top fence contractor in Madison, WI, our PVC is manufactured to accommodate normal temperature swings in the Midwest.

How does PVC hold up to weed eaters?

As with all PVC and wood products, direct contact with lawn and garden equipment can cause damage to the posts. Use caution when operating any type of equipment near fence posts, especially commercial trimmers, which are more aggressive. Ask us about our weed barrier products for lawn trimming near your fence.

Should my vinyl fence be unique to my yard?

It is absolutely essential that you select a fence contractor who is also a custom fabricator. At AmeriFence Corporation of Madison, we use a five-step process to build your vinyl fence.

1. At AmeriFence Corporation of Madison, we personally meet with you to review your design and layout.
2. We stake your yard for your review and approval.
3. We provide you with a post layout map, showing you where each fence post will be installed.
4. After the posts are set, we make a fabrication drawing, illustrating the dimensions and slope of each bay.
5. Our computerized custom fabrication shop fabricates each individual panel according to this drawing.

Pre-boxed and pre-cut vinyl fencing just won’t do for your home.